1.Choose the type selection of types should be adapted to choose the triangle, triangle, otherwise the pulley groove in abnormal situation. Switch to a triangle, with best old to agricultural machinery parts procurement, in case the type will make a mistake。
2.Right before the equipment can be used, if the layout of the two axial spacing is adjustable, shorten the distance between first and good adhesive tape and then adjust the spacing as needed; If the spacing is not adjusted in two axis, is a triangle can be set into the first round of slot, and then change another pulley, the triangle mount, using the same method will be fitted with a set of triangle. Device to stop use something hard to pry, hard to drag on triangle, in case of triangle belt elongation too loose or too tight.
3.Avoid channeling device pulley, the two pulley on the middle of the necessary alignment, or it will form a triangle unilateral operation, serious wear and tear, and use full down triangle.
4.Elastic for triangle firmness often view the adjustment is necessary, make it conform to the requirements. Triangle is not only simple skid too loose, also add triangle wear, and even cannot transfer the power; Stretched too tight, not only can make the triangle deformation and damage of simple, together will form a main bearing and clutch bearing because of the force is too large, and speed up the triangle wear. Correct view is: in the middle of each tape with the hand, 2 kilograms of straight pressure, subsidence is 20-30 millimeter advisable, not in season to adjust in a timely manner.
5.Old mo mixed doubles the root, or more than three root triangle needs to replace, want to choose the triangle rule types, each group of triangle joint tightness and demand, eliminate the number of old and new, mixed or cutting use, otherwise, the old and new triangle uneven, and even the old can’t afford to triangle effect, influence and power transfer to shorten the triangle of life.
6.Beware of oil contamination in use to watch the triangle and stained with mud, to avoid corrosion physical touch, such as acid, alkali to prevent slippage triangle and early damage and corrosion
Post time: Jun-12-2018